Turn a DIY Tutorial into an Email-Gated Supply Checklist
Short answer: A DIY supply checklist prevents the second hardware-store trip. Extract materials, quantities, tools, and the cut list from the video, then gate the printable checklist and cut plan.
The most common failure in DIY projects is an incomplete supply run. A checklist that matches the video exactly is a genuinely useful lead magnet because it saves a trip, not just time.
What usually goes wrong in diy
Videos skip small consumables
Screws, blades, sandpaper, and finish are easy to omit on camera and essential at the bench. The checklist should include consumables explicitly.
Quantities are estimated on the fly
A list without quantities forces viewers to guess. Include units and a small waste allowance for cuts.
Cut lists are buried in the middle
The cut list is the most re-read part of a DIY project. Put it on its own section with dimensions and a diagram placeholder.
How to build the supply checklist
1. Extract materials, tools, and consumables
Build three columns. Materials include lumber and hardware; tools include anything powered or specialty; consumables include blades, bits, tape, and finish.
2. Add quantities and a waste allowance
Give each material a quantity and unit, then add a small allowance for offcuts. State the assumption so readers can adjust.
3. Create a separate cut list
List every cut with length, width, and quantity. Add a note about which offcuts can be reused.
4. Gate the printable checklist
Keep the tool list visible, then gate the printable checklist and cut plan. The printable version is what people take to the store.
Example checklist block
Materials: 2 × 4 lumber (4), wood screws 2½″ (24), wood glue (1). Tools: circular saw, drill, square, clamps. Consumables: 80-grit and 120-grit sandpaper, finishing oil.
Frequently asked questions
Should I include prices?
Prices vary by region and date, so avoid exact totals. A relative budget band is safer and stays accurate longer.
How detailed should the cut list be?
Every cut needs dimensions and quantity. If the project has repeated cuts, group them so the reader can batch the work.
Can I include safety notes?
Yes, and you should. Add the required protective equipment and a short note for the highest-risk step.
What should the email unlock?
The printable checklist, cut plan, and a short email series with the build sequence and common mistakes.
Related reading
Build this guide from your own video
Paste a YouTube link. GatedGuide turns it into a hosted, email-gated supply checklist.
Start free